The 2026 Chevy Colorado uses a crew cab and a short, approximately 5-foot bed. Chevrolet’s U.S. product page gives an overall length of 214 inches, a width of 84.4 inches including mirrors, and a height range of 78.8–82.7 inches. These overview figures are useful for initial planning, but tight garage or accessory fitment requires measurements for the exact trim and truck.
This guide explains bed sizes, cargo measurements and the distinction between usable space and carrying capacity. Researched September 14, 2026. We have not physically measured a 2026 Colorado, and the illustrations below are not scale drawings.
2026 Chevy Colorado dimensions at a glance
| Measurement | Published figure | How to use it |
|---|---|---|
| Overall length | 214 in. | Chevrolet’s overview figure, not a trim-by-trim fitment specification |
| Width including mirrors | 84.4 in. | Use mirror width when assessing an opening |
| Overall height | 78.8–82.7 in. | Identify the exact trim and any added equipment |
| Unloaded weight | 4,340–5,260 lb. | Not a payload rating or loaded vehicle weight |
Source: Chevrolet’s 2026 Colorado FAQs. A single length or height can conceal important differences between regular trims, off-road versions and accessory-equipped trucks. Do not combine the shortest body measurement from one listing with the widest or tallest measurement from another and call it a verified configuration.
Colorado bed length, width and cargo volume
Chevrolet dealer Don Brown Chevrolet’s cab-and-bed guide publishes the following cargo-box measurements. They are useful reference figures, but we could not independently confirm this entire bed table in a readable manufacturer specification sheet. Verify the exact truck before ordering a close-fitting cover, drawer unit or camper accessory.
| Cargo-box measurement | Dealer-published value | Meaning |
|---|---|---|
| Bed length | 61.7 in. | Approximately 5 ft. 1.7 in.; commonly rounded to 5 ft. 2 in. |
| Bed width at floor | 58.8 in. | Wider floor dimension, not the wheelhouse opening |
| Width between wheelhouses | 45.5 in. | The narrower clearance for an object resting on the floor |
| Cargo-box volume | 41.9 cu. ft. | Volume, not allowable cargo weight |
The distinction between 58.8 inches and 45.5 inches matters more than a generic description of a “wide bed.” A rigid box may fit across part of the cargo area but not slide between the wheelhouses. Bedliners, mounting rails and installed storage can reduce the clearance available to your particular load.
Can a four-foot-wide sheet lie between the wheelhouses?
Using the published 45.5-inch wheelhouse spacing, a 48-inch-wide sheet is 2.5 inches too wide to lie flat between them. That arithmetic does not prescribe an alternative loading method. If you plan to support a load above the wheelhouses or extend it beyond the tailgate, follow the manufacturer’s loading instructions and applicable load-securing rules, and confirm support and weight limits.
Is there a six-foot or long-bed 2026 Colorado?
The current dealer guide describes one crew-cab, short-bed combination. Do not use dimensions from an older extended-cab or long-bed Colorado as evidence of a 2026 option. Model year and cab configuration must match before a used accessory’s “fits Colorado” description has any value.
What is the Chevy Colorado bed depth?
We have not verified a manufacturer bed-depth figure for this model year in the accessible sources. Measure from the actual bed floor to the rail or cover underside, depending on what you need to fit. A cargo-volume figure cannot substitute for that vertical clearance.
Why exterior dimensions vary between websites
Crabtree Chevrolet’s trim table, for example, lists approximately 213.0–213.2 inches for certain trims and different widths for WT/LT versus Trail Boss, whereas Chevrolet’s general FAQ uses 214 inches. This is why we identify the source and scope instead of presenting all of those numbers as interchangeable.
Measurements may describe different trims, exclude mirrors, use different rounding, or fail to account for accessories. A garage opening is an unforgiving place to discover which convention a comparison website used. Obtain the manufacturer information for your exact configuration and physically check the relevant clearances when the margin is small.
Will a 2026 Colorado fit in your garage?
- Measure usable length: include shelving, steps, workbenches and the door’s closed position, not just the building’s nominal depth.
- Check the opening: compare the narrowest passage with the truck’s mirror and body clearance.
- Check overhead obstacles: consider the door mechanism, lighting, roof accessories and the truck’s actual height.
- Allow working space: account for opening doors, walking around the vehicle and accessing stored items.
- Confirm the approach: a sloped driveway or angled entrance can make a simple rectangular comparison insufficient.
As a planning example, a nominal 20-foot space is 240 inches long. Subtracting Chevrolet’s 214-inch overview length leaves only 26 inches total at the front and rear before other obstructions. This is arithmetic, not a guarantee that the truck fits or that the remaining clearance is safe and usable.
Cargo volume is not payload or towing capacity
A large empty bed can reach its weight limit before it looks full. Passengers, cargo, fitted accessories and trailer tongue load must be assessed against the actual vehicle’s ratings. Do not treat the advertised maximum towing figure as permission to carry that weight in the cargo box.
We intentionally omit a universal payload number. One dealer page reviewed contains conflicting maximum-payload figures in its own text and table. Use the vehicle’s Tire and Loading Information label, certification information and applicable trailering documentation instead. Ask a qualified dealer to explain the limits for the exact configuration if you are unsure.
Bed and tailgate features worth checking
Chevrolet lists an available StowFlex tailgate, up to 17 available tie-downs and a mid-position tailgate rated to support 500 pounds. Those are feature-specific statements, not an unrestricted capacity for any load arrangement. The presence of a storage compartment, outlet or tie-down accessory must be verified on the individual truck.
Before buying an accessory, confirm the model year, bed type, mounting method and compatibility with existing equipment. A tonneau cover’s rails or a drawer system can change both access and usable space. Follow the instructions available through Chevrolet’s manuals and guides; a blog measurement table is not an installation or loading manual.
Frequently asked questions
How long is the 2026 Colorado bed?
The dealer-published reference is 61.7 inches, commonly described as a 5-foot-2-inch bed. Verify exact clearance for fitted equipment.
How wide is the truck with mirrors?
Chevrolet’s general 2026 specification is 84.4 inches including mirrors. A body-only width is not an equivalent garage-opening measurement.
Does a ZR2 Bison have a larger bed?
Do not infer a larger cargo box from off-road tires or increased clearance. Confirm the cargo configuration separately, including any bed-mounted equipment that occupies space.
Can I use an older Colorado bed cover?
Only if the accessory manufacturer explicitly lists compatibility with your model year and bed configuration. The model name alone is insufficient.
Bottom line
Use the 2026 Chevy Colorado dimensions to narrow your choices, then measure the specific truck for a tight fit. Keep bed volume, wheelhouse clearance, payload and towing limits separate. For condition and ownership checks, continue with our 2026 Colorado reliability guide.